bassytempo

what??

bassytempo

Your not the first one to say that to me

2 8's AKA Jeepbeats

iTrader: (19)

I ran it through Bassbox, looks like you are tuned around 33hz. It suggested that you tune it to 30hz, which would be two 4" ports, 19.2" long. Not sure if this will work any better for your setup, though.

Chadxton

iTrader: (1)

30 is kinda low for a Stroker 12.

Oddly, nothing looks out of the ordinary concerning size and tuning.

I sure hope you're not hammering the crap out of that sub.

Chadxton

iTrader: (1)

How much port area do you have? I suspect turbulence because those subs like to have plenty of port area. A single 6" won't do.

bassytempo

port area...hmm... well its 2 4" ports 16" long

bassytempo

I've only got one hooked up to 1 JBL 1200.1 @ 2ohms..

bassytempo

Anybody that i could take it to in the Edmonton area to get it checked out?

Chadxton

iTrader: (1)

Where's Gilligan's Hitch? He's got a buddy in AB area that knows the stroker.

Food for thought:
When I had my Stroker 15, I tried it temporarily in a 3.3 cu ft box. It barely moved with just 600 RMS and 27" of square port area. The 15 recommends 5 cubes, while the 12 needs only 3.2, and you've got about 25" sq port area, so I don't know what's the dealio, lol. The numbers seem to work, and that's what's confusing me.

If anything, I would start by cutting 3" off each port to increase the tuning frequency to 36/37.