rundown on install

Reply Subscribe

Thread Tools

Search this Thread

07-14-2009, 07:02 AM

#41

jerdavey

50 Watt CAFz'r

Join Date: Mar 2007

Posts: 162

It will work, just no fader control. You will have to set your gains on your amps just right to get a good blend from rear fill. Also make sure you can turn off your "sub out" and pass full range or you will get nothing but low frequency. Too bad you cant turn in the deck and pay a little difference for something with front rear and sub out and prefereably not Sony...

07-14-2009, 09:59 AM

#42

Daniel.s

0 Watt CAFz'r

Thread Starter

Join Date: Jun 2009

Posts: 26

it says sub/ rear out on the back of the deck, so either rear speakers or the sub. it should put out full range shouldnt it? and will the deck function properly if no speaker wires are hooked up?

07-14-2009, 12:34 PM

#43

420guy

500 Watt CAFz'r

iTrader: (5)

Join Date: Jul 2008

Posts: 975

Quote:

Originally Posted by Daniel.s

it says sub/ rear out on the back of the deck, so either rear speakers or the sub. it should put out full range shouldnt it? and will the deck function properly if no speaker wires are hooked up?

Yes you will get full range from the RCAs. Yes you can split them to run to both your amps. Yes as long as you tape all wires not being used the deck will function perfectly.

Nick

07-14-2009, 12:51 PM

#44

scroudt111

50 Watt CAFz'r

Join Date: Apr 2006

Posts: 359

Quote:

Originally Posted by Daniel.s

i rewired my hole car today, moved the speaker amp from under the driver seat to the trunk, going to have both amps mounted to the sub box. i think the problem may have been how i wired the amp previously. I used the speaker outputs from the deck, doubled left and left and right with right, ran two speaker wires to the amp and into the high input. didnt use rca wires. i know, that was dumb and probly caused the problems. my deck only has one rear/sub rca output, will it work ok if i just put a Y cable into the deck and use a rca to each amp? can i just tape up the speaker wires from the deck and not use them? im so happy this hasnt cost me anything just time and effort (I love warranty), but hey what else am i doing with my summer... lol

that is almost guarentee that's what the problem was.
Like the others said, y-adaptors will work, and turn the RCA output to full range. put but connectors on your unused wires, like the ones in the picture that I showed you yesturday.

07-14-2009, 04:45 PM

#45

Daniel.s

0 Watt CAFz'r

Thread Starter

Join Date: Jun 2009

Posts: 26

i returned my shitty pioneer amp, baught a kenwood 4 ch, 500 watt, hooked it all up today, ran rca's split, sounds good, hope it lasts. thanks for the help guys

07-14-2009, 10:29 PM

#46

scroudt111

50 Watt CAFz'r

Join Date: Apr 2006

Posts: 359

cool...good luck....if you ever decide you want to uprade anything...upgrade your deck before anything else.....trust me, even a mid/high level deck will make a world of difference with the equipment you already have.