My Installation Questions
#1
My Installation Questions
Ok this is watt i have and going to get: (most have already)
- 2din head unit without a subwoofer out by innovatek 7" touch screeen
- 2 6.5 NT power Front speakers Max power is about 500 watt each
- 2 6x9 nt power rear speakers max power about 1000 watt each
- 2 HIgh powered tweeters 350 watt peek each
- 1 DVC 12 Inch Infinity sub 1000 watt peak 300 rms
- 1 Power accoustic 4 channel amp 1400watt peak (link here http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&it em=260250440311)
- Need a Capacitor (wana know how many farads)
- Need a Mono amp that can handle the infinty sub)
- Need wires for the system (including the big 3)
- Need a fused distribution block
- Need a wiring harness
- Need Dynomate (trunk only probably)
Now MY questions are:
Which wires should i use for the big 3 with small explanation
which wires should i use for my amps with small explanation
Which cap should i use with small explanation
Which mono amp should i use small explanation (here are my choice
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&it em=300234889828
http://cgi.ebay.ca/KICKER-ZX750-1-MONO-BLOCK-AMPLIFIER-BRAND-NEW-NR_W0QQitemZ250261444505QQihZ015QQcategoryZ64570QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem
JL Audio 500/1 amplifier mono class D 500w SHIP WORLD - (eBay.ca item 140242588893 end time 25-Jun-08 17:55:06 EDT)
Or if you have any sugestions let me know
should i get dynomate?
How do i connect the remote turn on from the mono amp if there is no subwoofer out?
How do i connect both subs together( Power accoustic has a low pass cross over)
Please help my LOL!
I drive a cavalier 96 base model
- 2din head unit without a subwoofer out by innovatek 7" touch screeen
- 2 6.5 NT power Front speakers Max power is about 500 watt each
- 2 6x9 nt power rear speakers max power about 1000 watt each
- 2 HIgh powered tweeters 350 watt peek each
- 1 DVC 12 Inch Infinity sub 1000 watt peak 300 rms
- 1 Power accoustic 4 channel amp 1400watt peak (link here http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&it em=260250440311)
- Need a Capacitor (wana know how many farads)
- Need a Mono amp that can handle the infinty sub)
- Need wires for the system (including the big 3)
- Need a fused distribution block
- Need a wiring harness
- Need Dynomate (trunk only probably)
Now MY questions are:
Which wires should i use for the big 3 with small explanation
which wires should i use for my amps with small explanation
Which cap should i use with small explanation
Which mono amp should i use small explanation (here are my choice
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&it em=300234889828
http://cgi.ebay.ca/KICKER-ZX750-1-MONO-BLOCK-AMPLIFIER-BRAND-NEW-NR_W0QQitemZ250261444505QQihZ015QQcategoryZ64570QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem
JL Audio 500/1 amplifier mono class D 500w SHIP WORLD - (eBay.ca item 140242588893 end time 25-Jun-08 17:55:06 EDT)
Or if you have any sugestions let me know
should i get dynomate?
How do i connect the remote turn on from the mono amp if there is no subwoofer out?
How do i connect both subs together( Power accoustic has a low pass cross over)
Please help my LOL!
I drive a cavalier 96 base model
Last edited by carlos9898; 06-20-2008 at 11:18 AM. Reason: Forgot something
#5
#7
here's the best I can recommend with what you're getting, wire the 6x9's to the "rear" output off of deck power, get a 4 channel amp and wire your two front speakers to two of the channels (front RCA outs) from the amp, bridge the other two channels (rear RCA outs) of the amp to power the sub, don't get a sub amp.
Don't need the tweeters at all as the fronts seem to be "multi-way" anyway.
you will need a cap for this system, a 4awg wiring kit should do fine.
Don't need the tweeters at all as the fronts seem to be "multi-way" anyway.
you will need a cap for this system, a 4awg wiring kit should do fine.