carlos9898

Ok this is watt i have and going to get: (most have already)

- 2din head unit without a subwoofer out by innovatek 7" touch screeen
- 2 6.5 NT power Front speakers Max power is about 500 watt each
- 2 6x9 nt power rear speakers max power about 1000 watt each
- 2 HIgh powered tweeters 350 watt peek each
- 1 DVC 12 Inch Infinity sub 1000 watt peak 300 rms
- 1 Power accoustic 4 channel amp 1400watt peak (link here http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&it em=260250440311)
- Need a Capacitor (wana know how many farads)
- Need a Mono amp that can handle the infinty sub)
- Need wires for the system (including the big 3)
- Need a fused distribution block
- Need a wiring harness
- Need Dynomate (trunk only probably)

Now MY questions are:

Which wires should i use for the big 3 with small explanation
which wires should i use for my amps with small explanation
Which cap should i use with small explanation
Which mono amp should i use small explanation (here are my choice
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&it em=300234889828

http://cgi.ebay.ca/KICKER-ZX750-1-MONO-BLOCK-AMPLIFIER-BRAND-NEW-NR_W0QQitemZ250261444505QQihZ015QQcategoryZ64570QQ ssPageNameZWDVWQQrdZ1QQcmdZViewItem
JL Audio 500/1 amplifier mono class D 500w SHIP WORLD - (eBay.ca item 140242588893 end time 25-Jun-08 17:55:06 EDT)

Or if you have any sugestions let me know

should i get dynomate?
How do i connect the remote turn on from the mono amp if there is no subwoofer out?
How do i connect both subs together( Power accoustic has a low pass cross over)

Please help my LOL!

I drive a cavalier 96 base model

OPPressed

iTrader: (1)

you need more...

carlos9898

Max power for?

MTT

iTrader: (17)

I can't find your deck specs anywhere, please list model numbers for everything.

carlos9898

700TS 7" LCD TOUCH SCREEN CAR TV DIVX DVD MP4 CD PLAYER - (eBay.ca item 190225263920 end time 29-May-08 21:51:00 EDT)

carlos9898

Also what Awg hould i use for each set up like speaker wires, Subwoofer speaker wires?

MTT

iTrader: (17)

here's the best I can recommend with what you're getting, wire the 6x9's to the "rear" output off of deck power, get a 4 channel amp and wire your two front speakers to two of the channels (front RCA outs) from the amp, bridge the other two channels (rear RCA outs) of the amp to power the sub, don't get a sub amp.

Don't need the tweeters at all as the fronts seem to be "multi-way" anyway.

you will need a cap for this system, a 4awg wiring kit should do fine.

carlos9898

Ok so is my power accoustic amp powerful enuff for this system?

carlos9898

Also if i connect the front speakers to the amp and since the HU wont need to power these will more power be sent to the rears also what do i do with the extra wires from the deck for the fronts?

carlos9898

wouldnt it be more convience for the front speakers to be connected to the hu and the rear to the amp cuase my amp location will be in the back less mess less complications?