LED installing

Reply Subscribe

Thread Tools

Search this Thread

07-16-2003, 02:21 AM

xTimx

0 Watt CAFz'r

Thread Starter

Join Date: Jul 2003

Posts: 9

hey, i would like to put lights in the trunk like LEDs or something like that...i don't want to install the neon tube lights, cause i'm low on budget, i know i can afford LEDs, they're cheap, but how to install them, i have no clue, and i want to put ALOT of them inside my trunk too...PLEASE HELP!!!!

07-16-2003, 08:46 AM

Ettore Casagrande Jr.

Guest

Posts: n/a

Do yourself a favor and get the 12v LEDs ... so you don't have to do any resistor work.

Otherwise, if you have like 3 volt LEDs you CAN wire them in series but I almost guarantee that they'll burn out EVENTUALLY.

OR, you can figure out the math for the number of LEDs you have and use a resistor to lower the voltage to a suitable level for all of your LEDs wired in parallel.

07-16-2003, 11:21 PM

xTimx

0 Watt CAFz'r

Thread Starter

Join Date: Jul 2003

Posts: 9

ok lets say i do get the 12v LEDs, so how the heck would i wire them up though? and install them...help again please!

07-17-2003, 01:50 PM

Ettore Casagrande Jr.

Guest

Posts: n/a

EASY.

Wire positive to positive and negative to negative and you're done. Put a switch on the positive line and you're all done.

07-17-2003, 03:45 PM

xTimx

0 Watt CAFz'r

Thread Starter

Join Date: Jul 2003

Posts: 9

ok but what about alot of LEDs, and i mean alot of them, how would i wire them up

07-17-2003, 04:21 PM

Big Tom

50 Watt CAFz'r

Join Date: Aug 2000

Posts: 410

Ok, first off how many LED's are you talking here? 20? 100? 1000? How much current does each draw (probably 20-30mA)

there are a number of ways you could wire them up but we need some more info first off.

07-17-2003, 05:33 PM

xTimx

0 Watt CAFz'r

Thread Starter

Join Date: Jul 2003

Posts: 9

ok what i was prolly thinking of is prolly around 50-100 12v LEDs, but i have on idea how to install them, like put them in series or parallel or all that jazz...

07-18-2003, 05:44 AM

Ettore Casagrande Jr.

Guest

Posts: n/a

- All LEDs in parallel.
- 100 LEDs at 15mA is 1.5A so you can connect em with any wire you have laying around.
- Since the current is pretty low, you can use pretty much any switch you want too.

... anything else?

07-18-2003, 12:07 PM

o0DiaLiNG0o

50 Watt CAFz'r

Join Date: May 2003

Posts: 315

with the 12v leds, any need for a ANL fuse? and just oput of curiousity, what are these leds worth each (live outside of city, ownt be going in for a bit yet)