avidedtr

iTrader: (11)

Hello everyone,

I'm new to this forum and have 2 questions.

First, I having trouble finding a hole in the firewall to install my power cable. I would prefer not to drill. Also running the cable under the car is not an option because the gas tank is right under the drive/pass seats. The amp is located under the drivers seat (cannot be moved). Is there any other options?

Second, Metra has not released any faceplates for the 07 Fit and I really want to keep the system looking factory as much as possible. Thankfully Audiocontrol has the LC6i line level adapter. Do I tap into the ign harness for the 12v turn on signal or pull the radio and check for 12v output from the oem deck ( which I believe 99% is the same a 2001+ civic harness )

So far I've installed 6.5" JL components in the doors and ran all the wires needed except the power, ground.

Thanks
J

zinger002

iTrader: (1)

drilling is usually the easiest opyion you have, unless you wanna take your dash apart. my accord needed a hole, my friends civic needed a hole.. but not too sure about the fit's

avidedtr

iTrader: (11)

I managed to get 4 gauga through a gromet under the A/C lines on the passenger side.

Cheers