check list
check list
03-27-2007, 11:00 PM
#3
if you have a big install what would you relook at befor you power it up
3 amps
1 EQ
deck
air horns
with one or two more things
bigger alt
so thing like
relook at are the + all are going to the right place and are not flipped
do you have all the fuses in
that typ of thing
3 amps
1 EQ
deck
air horns
with one or two more things
bigger alt
so thing like
relook at are the + all are going to the right place and are not flipped
do you have all the fuses in
that typ of thing
03-28-2007, 12:40 AM
#6
50 Watt CAFz'r
Join Date: Oct 2006
Posts: 217
Just the basics:
even formatted pretty so you can REALLY use it as a checklist
-RCAs [ ]
-Amp to speaker wires, check connection [ ]
-Amp to speaker wires, check polarity [ ]
-Ensure all grounds are secure and touching bare metal. [ ]
-Ensure connection between remote lead/relay to remote terminal on amps [ ]
-Check fuse for main amp power wire(s) [ ]
-Check fuses on amps
-Make sure all speakers are sealed and boxes are not leaking [ ]
-Check gains at 75% vol. with variety of 0db tones depending on speakers [ ]
SQ specific:
-Check imaging. Perform "blind test" (Hands on steering wheel, preferably) [ ]
-Check imaging. Sit in the car and listen to a song on headphones and compare it to your car stereo. [ ]
-Ensure flat response curve. Use an RTA or db meter. Adjust EQ [ ]
-Ensure all resonant panels are deadened with dynamat or comparable [ ]
-Go [ ]
even formatted pretty so you can REALLY use it as a checklist
-RCAs [ ]
-Amp to speaker wires, check connection [ ]
-Amp to speaker wires, check polarity [ ]
-Ensure all grounds are secure and touching bare metal. [ ]
-Ensure connection between remote lead/relay to remote terminal on amps [ ]
-Check fuse for main amp power wire(s) [ ]
-Check fuses on amps
-Make sure all speakers are sealed and boxes are not leaking [ ]
-Check gains at 75% vol. with variety of 0db tones depending on speakers [ ]
SQ specific:
-Check imaging. Perform "blind test" (Hands on steering wheel, preferably) [ ]
-Check imaging. Sit in the car and listen to a song on headphones and compare it to your car stereo. [ ]
-Ensure flat response curve. Use an RTA or db meter. Adjust EQ [ ]
-Ensure all resonant panels are deadened with dynamat or comparable [ ]
-Go [ ]
03-28-2007, 10:01 AM
#7
Just the basics:
even formatted pretty so you can REALLY use it as a checklist
-RCAs [ ]
-Amp to speaker wires, check connection [ ]yes
-Amp to speaker wires, check polarity [ ]thing so will test with test cd
-Ensure all grounds are secure and touching bare metal. [ ]back to the battery
-Ensure connection between remote lead/relay to remote terminal on amps [ ]ok
-Check fuse for main amp power wire(s) [ ]yes i need a bigger one there just need to fined it
-Check fuses on amps ok
-Make sure all speakers are sealed and boxes are not leaking [ ] the best i can for the doors
-Check gains at 75% vol. with variety of 0db tones depending on speakers [ ]NEED TO LOOK AT THE GAIN BE FOR POWER UP (THANK YOU )
THIS I NEED TO POWER IT UP 1ST
SQ specific:
-Check imaging. Perform "blind test" (Hands on steering wheel, preferably) [ ]the best part
-Check imaging. Sit in the car and listen to a song on headphones and compare it to your car stereo. [ ] not hard
-Ensure flat response curve. Use an RTA or db meter. Adjust EQ [ ] need a rta meter
-Ensure all resonant panels are deadened with dynamat or comparable [ ]over 200sft and have 100 more if i need it
-Go to the show
ps thank you BradSk88
i do see 1 or 2 thing i missed
even formatted pretty so you can REALLY use it as a checklist
-RCAs [ ]
-Amp to speaker wires, check connection [ ]yes
-Amp to speaker wires, check polarity [ ]thing so will test with test cd
-Ensure all grounds are secure and touching bare metal. [ ]back to the battery
-Ensure connection between remote lead/relay to remote terminal on amps [ ]ok
-Check fuse for main amp power wire(s) [ ]yes i need a bigger one there just need to fined it
-Check fuses on amps ok
-Make sure all speakers are sealed and boxes are not leaking [ ] the best i can for the doors
-Check gains at 75% vol. with variety of 0db tones depending on speakers [ ]NEED TO LOOK AT THE GAIN BE FOR POWER UP (THANK YOU )
THIS I NEED TO POWER IT UP 1ST
SQ specific:
-Check imaging. Perform "blind test" (Hands on steering wheel, preferably) [ ]the best part
-Check imaging. Sit in the car and listen to a song on headphones and compare it to your car stereo. [ ] not hard
-Ensure flat response curve. Use an RTA or db meter. Adjust EQ [ ] need a rta meter
-Ensure all resonant panels are deadened with dynamat or comparable [ ]over 200sft and have 100 more if i need it
-Go to the show
ps thank you BradSk88
i do see 1 or 2 thing i missed
