92 GMC Pickup stuck bolts
#1
got a 92 gm single cab pickup in the shop, and we're trying to replace the back 4x6's...however the bolts at the base of the back pillar are seized bad...we've done everything from using a screwdriver up to an impact gun and a torch, they've also been soaking in lubricant for hours...already broke an extension and a bit (love that lifetime CT warranty)...any ideas on how to get either the bolts out or another way to get that pillar off?
thanks
thanks
#4
do u mean the torx head bolts that hold the seat belt retractors to the floor? which side are u heating up. i garanty that if you get them cherry red there is not a chance that those bolts will not come out i have had the same problem at least three or four times. hate those darn bolts. lol
oh ya and the side that u want to heat up is from the bottom side of the cab witch is probably what u are already doing.
[ September 16, 2005, 01:19 PM: Message edited by: Justin LaRouche ]
oh ya and the side that u want to heat up is from the bottom side of the cab witch is probably what u are already doing.
[ September 16, 2005, 01:19 PM: Message edited by: Justin LaRouche ]